Booking Page

 

 

We have unearthed the article relating to Hot Water Heater Repair listed below on the internet and believe it made good sense to write about it with you in this article.

Numerous modern residences make use of an electrical water heater for their heater, due to its benefit and also convenience of use. Nonetheless, much like any other electrical home appliances, problems might develop with its usage, unexpectedly. It can be really discouraging to get up to a cold shower instead of a hot one or having your bathroom with water that isn't warm adequate and even as well hot. Whatever the situation may be, hot water heater troubles can be rather nerve-racking. Thankfully, we've made a checklist of feasible remedies to your hot water heater concerns. There are a variety of aspects that can create most of these issues, it could be a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you switch off the main power supply for safety. Whatever the issue is, getting it taken care of must not pose excessive of a problem if you comply with these actions:

 

Check Your Power Supply:

As fundamental as this might appear, it is very necessary. Without appropriate power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker tripped. If the breaker is the problem, merely turn it off and on once again. Change any damaged or damaged fuse. Evaluate the home appliance with power after these adjustments to see if it's now working.

 

Inspect the Burner in the Water Heater:

If it's not a power issue, then attempt checking out your heating element if it is still functioning. Examine each of your heating elements to make sure the issue isn't with any of them. If any one of them is faulty, replace that component and then inspect whether the warm water is back on.

 

Examine Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to check the temperature setups on your top thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the access panel and press the red switch for temperature reset above the thermostat. This must aid heat up the water. Transform the circuit breaker back on as well as examine if the issue has actually been solved.

 

Call A Specialist:

If after replacing all defective components and resetting your temperature level, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for an expert point of view. The issue with your heating system could be that the hot and cold taps have been changed or it might be undersized for the amount of hot water needed in your house. Whatever the situation might be, an expert plumber would certainly assist address the issue.

 

Verdict

Water heater troubles are not always major. Most of them are because of small issues like a blown fuse or damaged heating element. Replacing the defective components ought to suffice. Nevertheless, if you are still not able to address the problem, give a call to your nearby plumber ahead to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I am very enthusiastic about How to Troubleshoot and Repair an Electric Water Heater and I really hope you enjoyed the entire blog post. Sharing is good. Helping people is fun. Many thanks for your time. Come back soon.

Request Estimate